2023:Labeled Value (Value Extractor)

WIP	This article is a work-in-progress or created as a placeholder for testing purposes. This article is subject to change and/or expansion. It may be incomplete, inaccurate, or stop abruptly. This tag will be removed upon draft completion.

A Labeled Value is an extractor type that can be used when configuring several data extraction tools such as a Value Reader or Data Type. It is designed to return text segments that have a spatial relationship to a defined label.

About

A Labeled Value is configured using two extractors: the Label Extractor and the Value Extractor. When the Label Extractor is set, Grooper uses spatial context to determine what value to return (for more on spatial context, see the Data Context wiki article).

The Labeled Value extracts information similarly to collating a Key-Value Pair. Unlike a Key-Value Pair, the extractor is self-contained in one object. There is no need to set one object as a "Key" and another object as a "Value". Instead, both the "Label" and the "Value" can be set on one object.

How To

Selecting the Extractor

Configuring on a Value ReaderConfiguring on a Data Type

Configuring on a Value Reader
In your Node Tree, create or select a Value Reader. Visit the Value Reader Wiki Page for instructions on how to create a Value Reader. Select the "Value Reader" tab. Click the drop down list next to Extractor and select Labeled Value.

Configuring on a Data Type
In your Node Tree, create or select a Data Type. Visit the Data Type Wiki Page for instructions on how to create a Data Type. Select the "Data Type" tab. Click the drop down list next to Local Extractor and select Labeled Value.

Basic Setup

Once you select Labeled Value as your extractor, you will need to set both your label and your value to be extracted.

Configuring the Label ExtractorConfiguring the Value ExtractorConfiguring Maximum Distance

Configuring the Label Extractor
Once Labeled Value is set as the extractor on the object you are configuring, click on the "Tester" tab. Click the drop down next to the Value Extractor property and select an extractor to use. For the purposes of this example, we are going to use a List Match extractor. However, any extractor can be used to capture the desired label.

Configuring the Value Extractor
Once Labeled Value is set as the extractor on the object you are configuring, click on the "Tester" tab. Click the drop down next to the Value Extractor property and an extractor to use. For the purposes of this example, we are going to use a Reference to another extractor that has been previously configured. However, any extractor can be used to capture the desired value.

Configuring Maximum Distance

Once the Label Extractor and the Value Extractor have been set, check to see if the correct text segment is being extracted. Sometimes Grooper will produce an undesirable result based on layout of the document. When this happens, the Maximum Distance property can be edited to hopefully improve your results. As you can see in this example, the Maximum Distance is set at 2in to the right and 2in to the bottom. This setting is telling Grooper to look for a value that is located two inches to the right and two inches below the Label Extractor. If Grooper finds a result within that 2x2 region, it will return that result as the value.

See Also

• Key-Value Pair (Collation Provider)