Talk:Scan Viewer (UI Element)
Reanna Patton 11/18/2025
- Might not be a bad idea to include a screenshot of what the Scan Viewer looks like here in the About section.
- Devon 11/18/2025: fixed
- Installing Grooper Desktop section: Where can users download the Grooper Desktop Installer?
- Devon 11/18/2025: Added a link to Grooper Xchange
- The Installing Grooper Desktop Supademo
- Second slide says "fild" instead of "file".
- Devon 11/18/2025: fixed
- The "Click Next" box on one of the screenshots covers up the "I accept the terms in the license agreement".
- Devon 11/19/2025: fixed
- The Scan Viewer for end-users > Managing Device Selection: How can users determine whether or not there is a default Scanner Profile set?
- Devon 11/19/2025: Had to dig for this one, but there is a way for users to tell. Mainly that there are no buttons beside the scan button available to click. I've added text and a screenshot explaining this.
- Selecting and Configuring a scanner from scratch supademo:
- It says to ensure Grooper Desktop is running and points to the yellow dot with the message "Device selection required". Is this what indicates that Grooper Desktop is running? How does the user know if Grooper desktop is running or not? (I see in a later screenshot it shows what it looks like when Grooper Desktop is not running. Maybe still include a little blurb about what it will look like on that first slide?)
- On the slide showing how to edit the device settings, the arrows are on the wrong text box.
- "Configure other settings if needed" How does the user know if they need to configure the settings? Is there a place that explains what these properties do?
- Devon 11/19/2025: Added more information in the voiceover for users to tell how Grooper Desktop was running. Fixed the arrow issue on the Device Settings slide. From what I understand, if any of of the other settings need to be configured and not left at the default, that's up to the user or their organization.
- Selecting a Saved Scanner Profile supademo:
- Same note about including how to tell whether or not Grooper Desktop is running on the first slide.
- Devon 11/19/2025: fixed.
- Same note about including how to tell whether or not Grooper Desktop is running on the first slide.
- Save scan settings to a Scanner Profile supademo:
- Same note about including how to tell whether or not Grooper Desktop is running on the first slide.
- Devon 11/19/2025: fixed
- Same note about including how to tell whether or not Grooper Desktop is running on the first slide.
- Operating the Scan Viewer > Create a New Batch: #1 is missing a period. #7 second bullet also missing a period.
- Devon 11/19/2025: fixed
- Creating a new Batch supademo:
- second slide "click the add button" box is missing arrows.
- Devon 11/19/2025: fixed
- On the last screenshot the arrows are on the wrong box. They need to be on the last box read.
- Devon 11/19/2025: fixed. The arrows were on the right box, I just didn't swap the text in the voiceover.
- second slide "click the add button" box is missing arrows.
- Start scanning with the Scan Viewer: #1 FYI is missing a period.
- Devon 11/19/2025: fixed
- Scanning with the Scan Viewer supademo:
- The first slide does what some of the other supademos don't. It explains how to tell if Grooper Desktop is running. I would just include this in the other supademos.
- The Crop Command supademo
- A couple of screenshots are missing the back and forth arrows.
- On the last screenshot, I would change the voice over from "ctrl" to "control" so that the AI says that right word.
- Careful putting text boxes at the bottom of the screen when they have left and right arrows. The last one is hard to click without accidentally hitting the lines at the bottom that take you to other places in the supademo.
- Devon 11/19/2025: All of the three issues for The Crop Command Supademo have been resolved.
- Other Image Adjustments supademo
- the first slide I would just get rid of the call out box that doesn't point to anything and just have the AI say that information, then put the arrows on the other box.
- Slide that shows the Adjust Image window, the text box is missing a bullet for skew angle.
- Devon 11/19/2025: fixed both above issues
- Basic Setup Supademo
- I would get rid of the call out box that doesn't point to anything and just let the AI say that information. Then put the arrows on a different text box.
- Devon 11/19/2025: fixed
- I would get rid of the call out box that doesn't point to anything and just let the AI say that information. Then put the arrows on a different text box.
- Defining a Scanner Profiles Folder supademo
- On the last instructional screenshot, Profilem should be Profile.
- Devon 11/19/2025: fixed
- On the last instructional screenshot, Profilem should be Profile.
- Setting a Default Scanner Profile supademo
- the first slide I would just get rid of the call out box that doesn't point to anything and just have the AI say that information, then put the arrows on the other box.
- 3rd screenshot has a typo "ser" instead of "set".
- Devon 11/19/2025: fixed both issues
- I would reference the Separation Profile wiki page when talking about Separation Profiles.
- Devon 11/19/2025: Added a link to the Separation Profiles article.
- Using a Separation Profile to Improve Performance supademo:
- On the screenshot where you add the Page Count event, there's a typo in the AI's voice.
- Devon 11/19/2025: fixed
- Remove Folders supademo:
- Typo on 5th or 6th slide. "Activty". It's both in the text and in what the AI says.
- Devon 11/19/2025: fixed
- Typo on 5th or 6th slide. "Activty". It's both in the text and in what the AI says.
Randall Kinard 11/18/2025
- Reanna's very thorough breakdown above covers what I would suggest.